TEL: +86-0371-55628659       MAIL: 
Home » Products » Special Truck » Fuel tank truck » Sino Heavy Duty Oil Truck 3000 Gallons 20 Cbm Water Tank Truck Load 20000 L-25000 L Sinotruk HOWO 6x4 Diesel Petrol Refueling Oil Transport Tanker Truck



Feel free to contact us, we are glad to help with our best service.
Share to:

Sino Heavy Duty Oil Truck 3000 Gallons 20 Cbm Water Tank Truck Load 20000 L-25000 L Sinotruk HOWO 6x4 Diesel Petrol Refueling Oil Transport Tanker Truck

Sino Heavy Duty Oil Truck 3000 Gallons 20 cbm Water Tank Truck Load 20000 L-25000 L Sinotruk HOWO 6x4 Diesel Petrol Refueling Oil Transport Tanker Truck
  • JSXT0825
  • JSXT
  • 8990x2380x3180mm
  • 20,000L + approx. 5%

1howo 336 (4)


Oil tanker truck, fuel tanker truck, petroleum tanker truck, which are mainly used for transporting oil.

some oil tanker truck could be also a refueling tank truck, with refueling device.
Our company also produce the oil tank trailer,the manufactuere standard could be according to European standard. API device.
Currently our company produce the oil tanker truck form 3000~ 35000 liters
Oil tank trailer from 40000~70000 liters.
The aircraft tanker shall meet the requirements of the latest version of MH/T 6101 "Aircraft Tanker". The refuelling system suitable for civil aviation jet fuel consists of chassis and tank, pumping system, control system and operation, with functions such as filtration, metering, refuelling, pumping, filling, self-filling and self-circulation.The following normal operating conditions shall be met.Working conditions require an ambient temperature of -25°C to +46°C.
The continuous working time shall not be less than 8 hours.
With Intelligent support systems.
It equipped with speed control valve for reel take-up and take-down to prevent the hose from automatically sliding out and unfolding too quickly when the hose is pulled out. A reel hose take-in/ take-out control device shall be installed with an anti-malfunction device.
With Deadman Control system.
It for Civilian aircraft, fighter jets, mobile refueling trucks.

overall length 9900mm ( cabin approxi 2m; the behind approxi 7.1~7.2m)
overall width 2500mm
overall height 3400mm
axle spacing 4325mm
voltage 24v
Lamp Side marker, rear clearance lamps & working lamp, others are supplied by chassis
Tank Weight 2300kg approx
Payload 14600kg
G.V.W.R.(Tank) 16900kg approx
Capacity 20,000L + approx. 5%
Compartments Four comp. 5KL/5KL/5KL/5KL (front to rear)
Shape of tank Ellipse,  ADR standard.
Tank material Aluminum 5083, the thinness of the shell is:5mm
Dish ends and
bulkhead material
Aluminum 5083, dished and flanged; the thinness of the shell is:5.5mm
Painting Outer surface paint. Color according to the customer's requirement.
Test pressure designed 36kpa.
Manhole One 20" diameter manhole per compartment
Loading & discharge system One 4" foot valve per compartment, pneumatic operate
One 3" carbon steel pipe line per compartment. Pipe line outlet is lies at right side of tank, located in the front of rear axle. French DN80
Measurement ruler One pc, calibrated by customer.
Pump (Optional) Aluminum steel gear pump made in CHINA, driven by PTO, pump in & out
Flow meter/reel (Optional) TCS printer, 20mx2' reel with refuel gun.
Ladder A detachable Carbon steel ladder is equipped at the rear of the tank.
Walkway Punched anti-plate along the entire length of tank.
Handrail Stainless steel handrail fixed on the top of tank and can be used to rise and drop.
Hose & carrie 2pcs carbon steel hose carrier box (1pcs each side)
with 1pc 3'x6m(including adaptor) discharge hose.
Fire extinguisher box 2 boxes 5KG are fixed on the left and right side of the tank.
Fire extinguisher 2 units 5KG powder fire extinguisher
Fender Steel material mudguards with plastic flap.
Side guard Both. Manufacture's standard design
Rear bumper Manufacture's standard design
Wheel stopper 2pcs, plastic
Specification for fittings:
Foot valve 4'' 4pc / china
Discharge valve 3'' 4pc / china
Air control switch  4 comp. 4pc / china
Manhole 20' 4pc / china
Hose 3'' 6 meters  1pc/ china
Pump Optionnel  1pc/china

fuel tank truck details


Q1. What is the minimum order quantity? Can the product be customized?
A1:Our MOQ is 1 unit. and yes, we can customized,we can produce trucks according to your special needs or requirements.

Q2. What should I do if I have problems during the use of the truck?
A2: We can supply English manual book and also take a video for showing how to resolve the problems, and you can also buy some spare parts together with your trucks.

Q3. How long is your delivery time?
A3: Trucks production time is about 20-30 working days.

Q4. What is your after-sales service system?
A4: trucks for 12 months warranty. Lifetime free technical consulting services and long-term factory price accessories support.

Q5: What are the modes of transportation?
A5: We can choose the Break Bulk, RORO, FR transportation and land transportation according to truck type and destination country.

Q6: What are the payment terms for trucks?
A6: We provide the EXW,FOB,CIF, DDU, DDP,etc.according to the specific situation.

Q7: Which brand of the trucks will you prefer to purchase?
A7: You can choose the brand of the HOWO, Sinotruk, Dongfeng, Shacman, FAW etc.

Q8: Is it available to print our own brand on our truck?
A8: Totally acceptable as you wish.



Copyright  2016 He Nan Ju Shi Xin Import and Export Trading Co., Ltd. All rights reserved. Designed by Leadong.