Availability: | |
---|---|
Quantity: | |
T-11
jushixin
JSXabx78
20Feet 24CBM Emulsion T11 Tank Container with Csc, ASME, Lr Or BV Certificates
Type | T-11 | ||
Transportation/Storage material | Emulsion | ||
Max gross weight
| 36000 kg | ||
Tare weight | 3.6tons(±3%) | ||
Type approvals | UN portable tank T11, IMDG, ADR/RID, TIR,CSC, UIC, TC, UK DfT, US-DOT CFR49 | ||
Nominal Capacity | 24000L(±0.75%) | ||
Design code | ASME VIII DIV 1 | ||
Design temperature | -40 ~ +130 ºC | ||
Desgin pressure | 4bar | ||
External desgin pressure | 0.41 bar | ||
Material | |||
Frame | SPA-H or equivalent | ||
Tank Shell | SANS 50028-7 Type 1.4402/1.4404 (C<=0.3%),ASTM A240 316L | ||
Finish | Cold Rolled 2B | ||
Tank Heads | SANS 50028-7 Type 1.4402/1.4404 (C<=0.3%),ASTM A240 316L | ||
Finish | Cold Rolled and polished with 180 grits | ||
Maximum allowable working pressure | 4 bar | ||
Test pressure | 6 bar | ||
External desgin pressure | 0.41 bar | ||
Shell Nominal | 4.40mm Minimum: 4.2 mm | ||
Head Nominal | 4.70mm Minimum: 4.50 mm | ||
Manhole | 500 mm, 8 mm × 90 mm Neck Profiled and Compensated,Fort Vale part No. E4D/8518025BT. 8 point fixing with Super Tanktyt Lid seal for corrosive cargo | ||
Air line valve | DN 40 ball valve terminating with 1" BSP connection and cap, Fort Vale part No. 530/0000G. | ||
Top outlet | Provision only, DN80 tank pad, Fort Vale part No. 368/0800,fitted with PTFE gasket & blind flange. | ||
Bottom Discharge Prov. | 45°Hi-Lift Footvalve fitted with a clamped butterfly valve terminating with a 3" BSP spigot with cap and chain, Fort Vale part No. 804/0010A. | ||
Spill box | Middle spill box fitted around manlid and safety relief valve;rear spill box fitted around airline valve and top outlet provision. Each box equipped with 2 PVC drain tubes. | ||
Steam Heating System | 8 longitudinal heating channels provided, giving a total effective heating area 10 square meters. Working pressure 4 bar, test pressure 6 bar. Inlet 3/4" BSP, outlet 3/4" BSP, dust cap fitted. A drainage provision with 3/8" BSP is fitted to the outlet pipe. | ||
Remote Control system | 3 mm stainless steel cable coated with plastic is fitted to the bottom rail of right side. And an emergency decal is fitted above the cable. | ||
Fusible link | Provision | ||
Dipstick | Provision, dipstick bracket is fitted to the neckring of the manlid, | ||
Thermometer | Dual scale thermometer, -40~160 ˚C (-40~320 ˚F), fitted on rear end to lower left side. | ||
Document holder | Ф 80 mm plastic document holder is fitted to the rear right hand side beam. A drain hole is provided at the lowest point. | ||
Insulation & cladding | |||
Insulation | 50 mm thick Rockwool (50kg/m2) where possible | ||
Cladding | Shell | 1.8 mm thick white GRP (RAL9010) with butt joints.With 6-off stainless steel strip (0.8*60*C). Sealed by silicone sealant.Ф10mm drain hole per panel on bottom. | |
Ends | 2 mm thick mould GRP end | ||
Frame Details | |||
Type | Full frame beam design ISO 1496/3 (1CC) with hollow section bottom rails. | ||
Corner castings | ISO 1161 8-off in total | ||
Ladder(s) | Non-slip stainless(304 S/S) at rear right hand side | ||
Walkway | F type 475mm wide non-slip aluminium | ||
Earthing lug | stainless(304 S/S), fitted to rear bottom member | ||
Painting | Carbon steel shotblasted to Sa 2 1/2 profile. | ||
COATING / INSULATION | |||
Tests | 36000kg | ||
Stacking at | 192000kgs | ||
Transverse Racking test | 150000 Newtons | ||
Impact test at | SRS Method a / at R = 36000 kg | ||
SUBSTANCES SUITABLE FOR TRANSPORT :In accordance with the requirements of the applicable regulations and the construction of the tank and its equipment.(Substances not compatible with the tank and/or its accessories are excluded for transport) |
1. The functions of this series container tanker:
---This series tank semi trailers are suitable for the transportation of transport Chemical liquid like HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO,Alcohol Acid,Emulsion etc.,internal strengthen lozenge expanded metal mesh transition,Plastic-lining thickness 16mm anti corrosion.
---The volume varies widely from 20 cube meters to 52 cube meters, we can manufacture it according to your needs.
2.Design proposal of 20 feet tank container
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
3.Optional parts for the tanker container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum:HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc. Chemical Liquid.
4.BRIEF INTRODUCTION TO OUR FACTORY:
He Nan Ju Shi Xin, a special vehicle manufacturing corporation
with the professional experience more than 30 years, certified by the Chinese
government manufacture,Majored in semi trailer, special vehicle manufacturing, our
products are mainly exported to Philippine, Ethiopia, Thailand, Myanmar, Vietnam,Congo, Kenya, Tanzania, etc...More than 20 countries.
5.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY:
---Offering the one-stop full lifecycle services;
---Our vehicle users will receive 24-hour uninterruptible "Entire Journey" service
---CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
--- Small Order Can Be Accepted;
---Any Color & Logo Available;
---The Product Dimension + Specifications Can Be Designed As Your Needs.
6.Buying Guides
---You please send us your enquiry;
---We shall reply you with the quotation within 12 hours;
---We negotiate on the configuration that you need;
---Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
---Manufacturing process updated news → completing production;
---Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
20Feet 24CBM Emulsion T11 Tank Container with Csc, ASME, Lr Or BV Certificates
Type | T-11 | ||
Transportation/Storage material | Emulsion | ||
Max gross weight
| 36000 kg | ||
Tare weight | 3.6tons(±3%) | ||
Type approvals | UN portable tank T11, IMDG, ADR/RID, TIR,CSC, UIC, TC, UK DfT, US-DOT CFR49 | ||
Nominal Capacity | 24000L(±0.75%) | ||
Design code | ASME VIII DIV 1 | ||
Design temperature | -40 ~ +130 ºC | ||
Desgin pressure | 4bar | ||
External desgin pressure | 0.41 bar | ||
Material | |||
Frame | SPA-H or equivalent | ||
Tank Shell | SANS 50028-7 Type 1.4402/1.4404 (C<=0.3%),ASTM A240 316L | ||
Finish | Cold Rolled 2B | ||
Tank Heads | SANS 50028-7 Type 1.4402/1.4404 (C<=0.3%),ASTM A240 316L | ||
Finish | Cold Rolled and polished with 180 grits | ||
Maximum allowable working pressure | 4 bar | ||
Test pressure | 6 bar | ||
External desgin pressure | 0.41 bar | ||
Shell Nominal | 4.40mm Minimum: 4.2 mm | ||
Head Nominal | 4.70mm Minimum: 4.50 mm | ||
Manhole | 500 mm, 8 mm × 90 mm Neck Profiled and Compensated,Fort Vale part No. E4D/8518025BT. 8 point fixing with Super Tanktyt Lid seal for corrosive cargo | ||
Air line valve | DN 40 ball valve terminating with 1" BSP connection and cap, Fort Vale part No. 530/0000G. | ||
Top outlet | Provision only, DN80 tank pad, Fort Vale part No. 368/0800,fitted with PTFE gasket & blind flange. | ||
Bottom Discharge Prov. | 45°Hi-Lift Footvalve fitted with a clamped butterfly valve terminating with a 3" BSP spigot with cap and chain, Fort Vale part No. 804/0010A. | ||
Spill box | Middle spill box fitted around manlid and safety relief valve;rear spill box fitted around airline valve and top outlet provision. Each box equipped with 2 PVC drain tubes. | ||
Steam Heating System | 8 longitudinal heating channels provided, giving a total effective heating area 10 square meters. Working pressure 4 bar, test pressure 6 bar. Inlet 3/4" BSP, outlet 3/4" BSP, dust cap fitted. A drainage provision with 3/8" BSP is fitted to the outlet pipe. | ||
Remote Control system | 3 mm stainless steel cable coated with plastic is fitted to the bottom rail of right side. And an emergency decal is fitted above the cable. | ||
Fusible link | Provision | ||
Dipstick | Provision, dipstick bracket is fitted to the neckring of the manlid, | ||
Thermometer | Dual scale thermometer, -40~160 ˚C (-40~320 ˚F), fitted on rear end to lower left side. | ||
Document holder | Ф 80 mm plastic document holder is fitted to the rear right hand side beam. A drain hole is provided at the lowest point. | ||
Insulation & cladding | |||
Insulation | 50 mm thick Rockwool (50kg/m2) where possible | ||
Cladding | Shell | 1.8 mm thick white GRP (RAL9010) with butt joints.With 6-off stainless steel strip (0.8*60*C). Sealed by silicone sealant.Ф10mm drain hole per panel on bottom. | |
Ends | 2 mm thick mould GRP end | ||
Frame Details | |||
Type | Full frame beam design ISO 1496/3 (1CC) with hollow section bottom rails. | ||
Corner castings | ISO 1161 8-off in total | ||
Ladder(s) | Non-slip stainless(304 S/S) at rear right hand side | ||
Walkway | F type 475mm wide non-slip aluminium | ||
Earthing lug | stainless(304 S/S), fitted to rear bottom member | ||
Painting | Carbon steel shotblasted to Sa 2 1/2 profile. | ||
COATING / INSULATION | |||
Tests | 36000kg | ||
Stacking at | 192000kgs | ||
Transverse Racking test | 150000 Newtons | ||
Impact test at | SRS Method a / at R = 36000 kg | ||
SUBSTANCES SUITABLE FOR TRANSPORT :In accordance with the requirements of the applicable regulations and the construction of the tank and its equipment.(Substances not compatible with the tank and/or its accessories are excluded for transport) |
1. The functions of this series container tanker:
---This series tank semi trailers are suitable for the transportation of transport Chemical liquid like HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO,Alcohol Acid,Emulsion etc.,internal strengthen lozenge expanded metal mesh transition,Plastic-lining thickness 16mm anti corrosion.
---The volume varies widely from 20 cube meters to 52 cube meters, we can manufacture it according to your needs.
2.Design proposal of 20 feet tank container
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
3.Optional parts for the tanker container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum:HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc. Chemical Liquid.
4.BRIEF INTRODUCTION TO OUR FACTORY:
He Nan Ju Shi Xin, a special vehicle manufacturing corporation
with the professional experience more than 30 years, certified by the Chinese
government manufacture,Majored in semi trailer, special vehicle manufacturing, our
products are mainly exported to Philippine, Ethiopia, Thailand, Myanmar, Vietnam,Congo, Kenya, Tanzania, etc...More than 20 countries.
5.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY:
---Offering the one-stop full lifecycle services;
---Our vehicle users will receive 24-hour uninterruptible "Entire Journey" service
---CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
--- Small Order Can Be Accepted;
---Any Color & Logo Available;
---The Product Dimension + Specifications Can Be Designed As Your Needs.
6.Buying Guides
---You please send us your enquiry;
---We shall reply you with the quotation within 12 hours;
---We negotiate on the configuration that you need;
---Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
---Manufacturing process updated news → completing production;
---Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.